
The range's race tubeless: grip in the rain, efficiency and controlled weight.
| Size700 × 28C (28-622) | Weight240 g | ColourBlack | Pressure3 – 5.9 bar |
The Comtura Prima is the race tyre of the Tufo tubeless range: the one you fit for a cyclosportive, a road race or a fine Sunday ride, and keep afterwards for training because it lasts. It aims for two things at once — rolling fast and holding in the rain — where most race tyres choose the first and give up the second.
The tread is in Grip Silica, a high-silica blend: this is what gives grip on wet roads, on white lines and on cold tarmac at the start of a ride. Beneath it, the casing is impregnated with Liquid Rubber, a low-hysteresis rubber — it returns less energy as heat with each wheel turn, so less rolling resistance. The tread is smooth in the centre, discreetly patterned on the shoulders.
Casing 210/375 TPI, supple, which follows the road surface's defects rather than bouncing off them — as much comfort as speed retained. Under the tread runs a Vectran barrier, a very high-tenacity fibre that stops glass shards and flint without stiffening the tyre, and contributes to cornering stability. A rubber puncture-protection belt backs it up, just under the rubber.
Aramid beads and profile compatible with hookless rims, like almost all recent carbon rims. Classic tubeless fitting: airtight rim tape, valve, Tufo Tubeless Ready sealant. In 25, 28 and 32 mm, black or tan sidewalls.
|
The toughest material in the Tufo catalogue: a Vectran layer, a liquid-crystal polymer five times stronger than steel of equal cross-section, against punctures, cuts and blowouts. |
Nanostructured silica tread compound, tailored to each discipline. Its strong point is grip, especially in the rain. |
|
Casing compound made of liquid rubber and nanostructured silica, with low hysteresis: it is what gives the top-of-range models their efficiency. |
A thickness of rubber placed under the tread: whatever gets through the rubber stops there before reaching the casing. It adds to the model's puncture barrier; it does not replace it. Tufo calls it “protective rubber ply”. |
| Racing |
|
Lightness |
|
| Comfort |
|
Protection |
|
| Longevity |
|
Training |
|
| Version | Size | Weight | Pressure | Colour |
|---|---|---|---|---|
| Comtura Prima 25 | 700 × 25C 25-622 · 210/375 TPI |
220 g | 4 – 6.3 bar | Black · Black/Beige |
| Comtura Prima 28 | 700 × 28C 28-622 · 210/375 TPI |
240 g | 3 – 5.9 bar | Black · Black/Beige |
| Comtura Prima 32 new for 2026 |
700 × 32C 32-622 · 210/375 TPI |
265 g | 2.5 – 5.5 bar | Black · Black/Beige |
Weights as stated by Tufo.
| Référence | TUCPRIMA-28/BK |
|---|---|
| Origin | Handmade in the Czech Republic |
| Weight | 240g |
| Width | 28mm |
| Pressure | 3.4 - 5.5 bars |
| TPI count | 210/375 |
| Use | Race/Training |
| Code EAN | 8592723056706 |